Image of  Zulfiqar Khan

If we look to the future, our energy reserves used at our current rates will last us perhaps another 50鈥60 years for oil and gas, and coal another 100 years. What are we going to do when that runs out? It's a question that 裸聊直播's Professor Zulfiqar Khan听is hoping to find an answer to.

The EU鈥檚 Renewable Energy Directive, urging European states to produce 20% of their energy from renewable sources by 2020, was one another important factor听that inspired Professor Khan鈥檚 pivotal research and resulting technology, but it was the long-term challenges as well as the short-term ones that he wanted to address.

The challenges

Not only are non-renewable sources of energy, especially those derived from fossil fuels, finite, but they contribute to greenhouse gases, exacerbating ozone depletion and global warming. Whilst there have been advancements in some renewable technologies,听Professor Khan, who is also a member of the University鈥檚 Sustainability Committee, suggests there are still challenges in terms of efficiency and the amount of useful energy that can be generated versus what the world actually needs.听For example with Solar Photovoltaic (the most commonly used solar panel), there is a limited supply of materials needed to build the technology.听

Additionally, there are other issues, which is why Professor Khan says Solar Photovoltaic can鈥檛 be seen as a long term solution: 鈥淭he thermal efficiency of thermo-fluids (fluids used as a medium of heat energy transfer) have upper thresholds and听has implications for the durability of mechanical systems. Costs of conventional energy materials such as cobalt and lithium carbonates have been rising sharply since 2015鈥16, and thermal instability of lithium ion batteries is still significant.鈥

76%
The percentage of the UK鈥檚 primary energy that came from oil and gas in 2017
51
Years that oil reserves are estimated to last
0.02%
Percentage of annual solar energy that meets the UK鈥檚 energy demand

Developing the new technology

Supported by a team of PhD students and Postdoctoral researchers, Professor Khan set to work on developing solar thermal (low carbon) technologies which used nano-enhanced thermofluids and storage materials instead of traditional solar panel technology. Rather than creating commonly-seen standalone panels, he envisaged the technology becoming integrated within standard building practices. 鈥淚 am developing means of using readily available and sustainable materials to be applied in flat plate solar thermal systems through a combination of thermofluids with nano additives and efficient thermal storage, which will help meet our future energy needs.鈥

The multidisciplinary research combined materials sciences (nano coatings), mechanical engineering (heat transfer and thermodynamics), and electrochemistry (corrosion). 鈥淚t will put 裸聊直播 in particular and the UK in general on the international map as a leader in developing clean energy technologies,鈥 Professor Khan says, 鈥淲orking together with other disciplines can bring huge benefits and opportunities for research, which helps to give it originality, significance and reach.鈥

20%
This technology could see a 20% reduction in CO2 emissions
47%
The amount that could be saved from fuel bills

Putting it into action

Professor Khan鈥檚 renewable energy source works through reducing corrosion, improving heat transfer and fluid dynamics, and using nano coatings to enhance surface efficiencies. There are four parts to the system. The first focuses on generating heat for colder climates, while the second looks at generating electricity in sunnier climes. The third component involves thermo-fluids, with the aim of improving the efficiency of fluids within the solar energy system, and the final part of the plan seeks to perfect the integration of heat storage and recovery system from waste energy.

Funding from start-up company Future Energy Source Ltd allowed the team to set up labs in Poole, Dorset and create a large-scale model of the solar thermal system. All four parts of Professor Khan鈥檚 model were successfully tested, as well as the heat recovery units, solar Organic Rankine Cycle, optimised thermo-fluids, and efficient thermal storage. The result was a clean, low cost and sustainable power and heat generator that works using solar radiation, known as a 鈥楲arge Scale Flat Plate Solar Collector鈥 (LSFPSC).

Professor of Design, Engineering and Computing

If we look to the future, our energy reserves used at our current rates will last us perhaps another 50 鈥 60 years for oil and gas, and coal another 100 years. What are we going to do when that runs out?

Moving to market

Since the trials, many parts of Professor Khan鈥檚 creation have been successfully patented and are being commercialised by Future Energy Source Ltd.听The technology is now on sale and has the potential to achieve a 20% reduction in CO2 emissions and save 47% on fuel bills,听with projected 拢1,000,000 revenue per year for the company with eight people employed as one of the outcomes of this research, and the forecast to double this number by 2020鈥21.

鈥淓conomic evaluations of our technology have shown that it provides a much more economical solution than other globally available technologies,鈥 explains Professor Khan. 鈥淚t also provides a shorter payback period 鈥 that is the time it takes to reclaim your original investment. Our technology takes about 2.4 to 6.5 years to achieve payback, while typical commercial flat plate collectors can take as long as 8鈥12 years.鈥

With his game-changing technology now available to buy, Professor Khan has moved the focus of his research into new areas: clean growth and the future of mobility. 鈥淲e can learn to do without many things, but without energy, life as we know it would not be the same,鈥 says Professor Khan.

News from the Faculty of Science & Technology